Aero Connect Setup Guides

Open Settings

Launch the Settings app on your Android device.

Go to Network Settings

Tap Network & internet → Wi‑Fi.

Access Advanced Network Settings

Tap your connected network → Advanced → IP settings → Change from DHCP to Static. Scroll to find the endpoint fields.

Enter Aero Connect Endpoints

In the endpoint fields, enter:

• Endpoint 1: 103.245.68.10
• Endpoint 2: 103.245.68.11

Save and Restart Connection

Tap Save. Toggle Airplane mode on for 10 seconds, then off to refresh the connection.

Verify Setup

Launch your favorite mobile game (e.g., PUBG Mobile, Call of Duty Mobile). Open the server selection screen and verify that your ping (latency) is stable and packet loss is minimized.

Open Settings

Launch the Settings app on your iPhone or iPad.

Select Wi‑Fi Network

Tap Wi‑Fi → Tap the ⓘ icon next to your connected network.

Configure Endpoints

Scroll to Configure DNS → Change from Automatic to Manual. Tap Add Server twice and enter:

• 103.245.68.10
• 103.245.68.11

Save Settings

Tap Save in the top-right corner.

Refresh Connection

Toggle Wi‑Fi off and on to ensure changes take effect.

Test Your Connection

Launch your preferred mobile game. Check the in-game network stats to verify improved ping stability and reduced jitter.

Open Network Settings

Press Win + R, type ncpa.cpl, and press Enter.

Select Your Active Connection

Right‑click your active adapter (Wi‑Fi or Ethernet) → Select Properties.

Access IPv4 Properties

Select Internet Protocol Version 4 (TCP/IPv4) → Click Properties.

Enter Custom Endpoints

Select Use the following server addresses and enter:

• Preferred: 103.245.68.10
• Alternate: 103.245.68.11

Apply and Flush Cache

Click OK → Close. Open Command Prompt as Administrator and run: ipconfig /flushdns

Verify Configuration

In Command Prompt, run nslookup example.com. The Server: line should show one of your Aero Connect addresses.

Open System Settings

Click the Apple menu () → System Settings.

Select Network

Go to Network → Select your active connection → Click Details…

Configure Endpoints

Go to the DNS tab. Click the + button and add:

• 103.245.68.10
• 103.245.68.11

Apply Changes

Click OK → Apply.

Flush Cache

Open Terminal and run: sudo dscacheutil -flushcache; sudo killall -HUP mDNSResponder

Open Connection Settings

Open your system's network management settings panel (e.g., NetworkManager GUI).

Edit Current Connection

Find your active connection and click the settings icon to edit it.

Configure IPv4 Settings

Navigate to the IPv4 tab.

Set Manual Endpoints

Change Method to Automatic (DHCP) addresses only. In the servers field, enter: 103.245.68.10, 103.245.68.11

Apply and Restart Network

Click Apply. Turn your connection off and back on.

Clear Cache

Flush your local cache by running: sudo resolvectl flush-caches

Log Into Admin Interface

Navigate to 192.168.1.1 or 192.168.50.1 in a browser. Sign in with your administrator credentials.

Navigate to WAN

Under Advanced Settings, click on WAN.

Modify Allocation

Locate the server setting. Toggle Connect automatically to No.

Apply Aero Connect Servers

Enter:

• Server 1: 103.245.68.10
• Server 2: 103.245.68.11

Apply & Save

Click Apply. Allow the router up to 30 seconds to restart and bind configuration files.

Log Into Control Panel

Access via 192.168.0.1 or tplinkwifi.net in a web browser.

Open Internet Configurations

Navigate to Advanced → Network → Internet.

Configure Static Settings

Change setting mode to Use the Following Addresses.

Input Parameters

Set:

• Primary: 103.245.68.10
• Secondary: 103.245.68.11

Commit Setup

Click Save. Connected devices will inherit these routing protocols seamlessly.

Access Admin Dashboard

Navigate to 192.168.1.1 or routerlogin.net, entering admin credentials.

Navigate to Internet Setup

Go to Basic → Internet.

Switch Configuration

Locate the address field. Change from Get Automatically from ISP to Use These Servers.

Apply Server IPs

Enter:

• Primary: 103.245.68.10
• Secondary: 103.245.68.11

Click Apply

Click Apply. The gateway will reconnect with the custom servers active.

Connect to Router Gateway

Identify your router's default IP (typically 192.168.1.1 or 192.168.0.1, printed on the device) and type it into a browser.

Access WAN or DHCP Settings

Find settings labeled WAN Settings, Internet Settings, or DHCP Server Configuration.

Disable Automatic Allocation

Switch configuration from automatic to Manual or Use Custom.

Enter Aero Connect IPs

Enter:

• Primary: 103.245.68.10
• Secondary: 103.245.68.11

Commit Changes

Click Apply or Save. Reboot your gaming console or PC to fetch the new network variables.